The feature rich Trooper from Lone Star Cutting Solutions is perfect for increased production.
Scroll down for more information.
14 Gauge Steel Construction
Epoxy Coated
Ergonomic Keyboard Placement
17" wide
THC Mount
Emergency E-Stop
CONTROL FEATURES:
Large Flat Screen Monitor
Table Power – on/off
Control Power – on/off
Front Panel USB Port – 2nd USB located on side
Cutting Oxygen – on/off
Pre-Heat – Hi Low Control
E-Stop Button
An Air Scribe is generally used to mark on mild steel, stainless or aluminum.The marker can be used on any thickness material and excels on gauge materials.
The Air Scribe is securely mounted and easily "offset" to any tool already mounted on the machine.
FEATURES:
Lightweight
Low Air Consumption
High strength Carbide tipped point
Easy change-out
Easy to service
Allows efficiently produced shapes and letters as well as pipe cut-off
Manually set External Chuck - 0 inches through 4 inches (external chucking)
Cantilever design - mounted to Cutting Machine
Dual direction rotation
Pipe Jack Support System
ESS Set-up
Slag trays - customized to size of Water or Downdraft Table
Stout, reinforced steel construction
Lifting eyes for easy removal
Removable Combs and Slats
FEATURES:
1. 18 inches deep
2. Unitized into machine body
3. Single Zone
4. 1/8" x 3" steel Slats included
5. Single outlet for fume exhaust system connection - located center back of table.
6. Manual clean-out (Slag Removal Trays available)
Oxy-Fuel torch mounted on master carriage. Magnetic break-away torch/collision sensor stops machine motion automatically.
Includes:
Manual Ignition
Torch raise/lower
Individual gas control solenoids
Fuel preheat and oxygen hoses (machine to gas source)
Al necessary hoses and regulators sized according to machine specifications
FEATURES:
1. 18 inches deep
2. Unitized into machine body
3. Single Zone
4. 1/8" x 3" steel Slats included
5. Single outlet for fume exhaust system connection - located center back of table.
6. Manual clean-out (Slag Removal Trays available)
Machine Features
• Automatic Lead Screw Torch Height Control
• Dual Side Rack and Pinion Servo Motor Drive (X, Y)
• Heavy Duty Trucks
• Linear Precision guide rails
• Fully Welded Frame
• Limit and Homing Switches
• Heavy Steel Construction
• E-Chain Cable Track
• 3” X 3” Extruded Aluminum Bridge
• Waterbed – depth – 12 inches
Machine Specifications
• Positioning Accuracy: (+/-) .007
• Repeatability: (+/-) .002
• Max. Traverse Speed: 1000 ipm
• Max. Tools: (2) (Plasma, Oxy, Scribe, Manual Bevel Head and / or Drill)
• Max. Plasma System Amperage: 125
• Input Power-Machine Drive: 120/240V • 50/60Hz1-Phase 20 A.F.L amps
Standard Sizes | 4'X4' | 4'X6' | 5'X8' | 6'X10' | 6'X12' | |
| Effective Cutting Width | 4'6" | 4'6" | 5'6" | 6'6" | 6'6" | |
| Effective Cutting Length | 4'6" | 6'6" | 8'6" | 10'6" | 12'6" | |
| Overall Width | 7'9" | 7'9" | 8'9" | 9'9" | 9'9" | |
| Overall Length | 7'1" | 9'1" | 11'1" | 13'1” | 15'1” | |
| Gantry Height | 6" | 6" | 6" | 6" | 6" |
